Standard option

This is the standard option for cars or utes. It is also the preferred option for vehicles that have less than 12 months life.

Vehicle option three

Position the logo on the left and right-hand front doors
The logo should be 544mm wide by 220mm high and positioned 140mm from the left edge of the back door
Position it 60mm up from the body moulding. Move it up if a vehicle emblem is in the way

Position the logo with extension on the left and right-hand front doors
The main logo should be 370mm wide by 150mm high (excluding extension) and positioned 140mm from the left edge of the front door
Position it 60mm up from the body moulding. Move logo up if a vehicle emblem is in the way

The preferred placement is on the tailgate, left aligned, 100mm in from edge of back or tail light
This should be 40mm high and must always be set in Frutiger Roman, Pantone 3155
Centre it vertically within the clear space of the tailgate. If the tailgate is obstructed with existing vehicle branding or body mouldings, you may position it on the side of the vehicle. Where possible, line up with either the top or bottom of the logo text
On a ute position it 140mm from the left edge of the tray, and on a car 140mm from the right edge of the back of the car

This should be 50mm high and must always be set in Frutiger Black, capitals, Greater Green. Position it on the side, at the rear of the vehicle, 140mm from the back edge or tail light. Where possible, line up with either the top or bottom of the logo text; but always line up with the web address
You may also place the functional name on the tail gate, left aligned, positioned 100mm from the right edge. Centre it vertically within the clear space of the tail gate and always base align with the web address

This is available for Wairarapa vehicles only.
It must be set in Frutiger Bold, Greater Blue, 280mm in height and centred on the roof

This must be set in Frutiger Bold, Greater Blue, 50mm in height and positioned 50mm in from the left-hand side of the vehicle
Where possible, this should be lined up with either the top or bottom of the logo text