Maximum visibility

This is a high-profile option for cars and utes, to be used for maximum visibility.

Vehicle option one

Position the logo on the left and right -hand back doors. The logo should be 544mm wide by 220mm high and positioned 140mm from the left edge of the back door. Centre it vertically in the clear space of the door. Remember to follow the clear space guides
Ensure the logo does not run over any body mouldings

Position the logo with extension on the left and right-hand back doors. The main logo should be 370mm wide by 150mm high (excluding extension) and positioned 70mm from the left edge of the back door. Centre it vertically in the clear space of the door. When applying the logo follow the clear space guides
Ensure the logo does not run over any body mouldings

Always use the full colour icon
Position the right edge of the graphic 150mm from the back of the roof. It should be 2,200mm in diameter. This has been designed to fit most-sized vehicles but use your best judgement when dealing with unusually sized vehicles

The preferred placement is on the tail gate, left aligned, 100mm in from left edge of the tail light
This should be 50mm high and must always be set in Frutiger Bold, Greater Blue colour
If the tailgate is obstructed with existing vehicle branding or body mouldings, you canposition the web address on the side, at the rear of the vehicle, 140mm from the back edge or tail light. If you are applying on a car, only place it on the side without the petrol tank inlet